www.vsa-services.com

Note that (beginning from Etch) Debian GNU/Linux can encrypt your entire disk, including swap (except /boot), this can provide some interesting options when you are storing sensitive data.

Setting up Encrypted Disks using 2.6 kernel:

The following uses LUKS (Linux Unified Key Setup and Device mapper, which is available with any 2.6 kernels (2.6.12 or newer may be better choice for access to some cryptosystems to be available)

• Run fdisk and create partitions, the following is for a USB attached SATA disk (appears as /dev/sdb). The following works perfectly well with logical volumes (LVM). Ensure that lvm service is running (or restart it). In fact, I rarely use hard partitions nowadays and all my disks use LVMs only.
• Prepare the partition first. Enter a complicated string as the passphrase when prompted.This step is needed only once per disk/partition
  

  cryptsetup luksFormat -c aes-cbc-essiv:sha256 /dev/sdb1
  cryptsetup luksOpen /dev/sdb1 delta
  where delta is any random name
  
  root@ariesduo:~# ls -l /dev/mapper/
  total 0
  crw-rw---- 1 root root  10, 63 2006-09-06 09:31 control
  brw-rw---- 1 root disk 253,  0 2006-09-06 09:43 delta
  
  mkfs.ext3 /dev/mapper/delta
  
  cryptsetup luksClose delta
  

  Whenever the disk needs to be used,

  cryptsetup luksOpen /dev/sdb1 cryptbkupdev
  mount /dev/mapper/cryptbkupdev /backups
  

  and use it... After completing your work:

  umount /backups
  cryptsetup luksClose cryptbkupdev
  

  cryptsetup for older systems, such as CentOS 4.x or RHEL4

  Note that due to absence of LUKS the commands and usage is quite different. Now I am rebooting the server: First create the encrypted volume:

  [root@dualathlon32 ~]# cryptsetup create usbbbkupdrv /dev/sda2
  Enter passphrase:
  [root@dualathlon32 ~]# ls /dev/mapper/
  control  usbbbkupdrv
  

  Create an EXT3 filesystem and mount:

  [root@dualathlon32 ~]# mkfs.ext3 /dev/mapper/usbbbkupdrv
  
  [root@dualathlon32 ~]# mount /dev/mapper/usbbbkupdrv /mnt
  

  Upon reboot the device will disappear. One needs to issue "create" command again to "open" the device. Unlike LUKS where we can issue close and open commands. A correct password "opens" the device and is mountable immediately. A wrong password does not return any error but the EXT3 FS mount will fail. Let us reboot.

  Connection to 10.1.1.198 closed.
  anand@laptop-aries5672:~$ ssh root@10.1.1.198
  

  The system is back and up, login via ssh:

  root@10.1.1.198's password:
  Last login: Fri Jun 29 07:54:59 2007 from 10.1.1.33
  

  Note that by default the device is not available

  [root@dualathlon32 ~]# dmsetup ls
  No devices found
  [root@dualathlon32 ~]# ls /dev/mapper/
  control
  

  Create command "opens" an existing encrypted device if the right password is provided:

  [root@dualathlon32 ~]# cryptsetup create usbbbkupdrv /dev/sda2
  Enter passphrase:
  [root@dualathlon32 ~]# ls /dev/mapper/
  control  usbbbkupdrv
  [root@dualathlon32 ~]# mount /dev/mapper/usbbbkupdrv /mnt
  

  Now the mount succeeds!

  [root@dualathlon32 ~]# df -h|grep mnt
                        4.6G   42M  4.4G   1% /mnt
  [root@dualathlon32 ~]#
  

  Using GPG:

  Importing GPG Keys: GPG: "lynx -source http://server/dir/person_key.asc | gpg --import -"

  Using EncFS and FUSE

  modprobe fuse encfs ~/confidential/encrypted ~/confidential/unencrypted First time create the key etc. Mount the unencrypted dirs: encfs ~/confidential/encrypted ~/confidential/unencrypted After your work is finished, unmount: fusermount -u ~/confidential/unencrypted